01 · Fleet Management
Every vehicle, every trip, every cost: in one view
LIOMO Fleet connects the trackers and sensors in your vehicles to a platform your team uses every day: where each vehicle is, how it is being driven, what it needs next and what it costs to run.
Availability
Available now
Delivered on LIOMO Fleet, our own platform, with tracking hardware installed and supported by LIOMO.
The problem
Vehicles are expensive to run blind
01
No live picture
Dispatchers and managers call drivers to find out where vehicles are, and customers wait for answers.
02
Costs found too late
Fuel, maintenance, insurance and documents are tracked in separate places, so the real cost per vehicle is hard to see.
03
Risk on the road
Speeding, harsh driving, long idling and after-hours use go unnoticed until they show up as fines, wear or incidents.
04
Missed deadlines
Services and documents expire quietly when reminders depend on someone remembering to check.
The solution
One platform from the tracker to the monthly report
- Live map with each vehicle shown as Driving, Idle, Stopped or Offline.
- Trip history and route playback with distance and odometer from GPS.
- Alerts that reach the right people, from geofences to fault codes.
- Fuel, maintenance, document and income records alongside the vehicle data.
- Packages chosen vehicle by vehicle, so you pay only for what each vehicle needs.
How it works
How LIOMO Fleet works
01
Connect
A GPS tracker is installed in each vehicle and, where needed, wired to the vehicle electronics and to sensors such as temperature probes, door switches or fuel-level sensors.
02
Collect
Trackers report positions and readings over the mobile network to the LIOMO gateway, which decodes, validates and stores every message, even when it arrives after a gap in coverage.
03
Understand
The platform turns raw positions into trips, states, distances, fuel use, driver scores and costs, and checks every reading against your alert rules.
04
Act
Your team is alerted, reports are ready at the end of the month, and, where an immobilizer relay is fitted, a vehicle can be secured remotely with built-in safety checks.
Capabilities
What the platform does
01
Live map
Every vehicle with its current state and last report time, refreshed every few seconds, with your geofences drawn on the map.
02
Trips and playback
A trip-by-trip history for each vehicle, with route playback, distance and stops, and trips marked as work or private where you need it.
03
Geofences
Circles or drawn areas that alert on entry, exit or both, any time or only inside or outside the hours you choose.
04
Alerts
Idling, speeding, driving outside working hours, fault codes, temperature and humidity limits, door openings, panic button and signal jamming.
05
Vehicle data
Fuel level, engine RPM, engine temperature, oil pressure and voltage from the vehicle electronics, with charts and fault-code history.
06
Driver scores
Scores per driver based on speeding, harsh braking and acceleration, sharp turns and long idling, weighted per 100 km driven.
07
Service and documents
Reminders for services due and documents about to expire, and a health badge on every vehicle.
08
Fuel, costs and income
Fill-ups and consumption between full tanks, monthly costs per vehicle and per fleet, and income and profit where you record them.
09
Reports and exports
A monthly fleet report and a monthly report per vehicle, spreadsheet downloads and print-ready pages.
Platform packages
Packages, vehicle by vehicle
- 01
Tracking
Included on every vehicle: live map, trip history, route playback, distance and geofence alerts.
- 02
Vehicle data
Engine readings, charts and fault codes, for trackers wired to the vehicle electronics.
- 03
Sensors
Temperature, humidity, doors, cargo door, panic button, jamming detection, calibrated fuel sensors and driver tags.
- 04
Remote commands
Request a position, restart a tracker, change reporting intervals, switch fitted accessories, and immobilize or release.
- 05
Fleet intelligence
Idling, speeding and after-hours rules, harsh-driving events, driver scores and monthly fleet reports.
Inside the platform
The views your team works in every day
Use cases
Where it fits
Delivery and distribution
Know where every van is, prove arrival times, and keep cargo doors and load temperatures under watch.
Temperature-sensitive transport
Set temperature and humidity limits per vehicle and be alerted when a load space stays outside them.
Service and field teams
Send the nearest vehicle, check time on site, and separate work trips from private use.
Passenger transport and machinery
Follow buses, cars and equipment in one place, with engine data and maintenance reminders for each.
Business value
What it changes for the business
01
Control of running costs
See fuel, maintenance and document costs per vehicle and per kilometre, and spot the vehicles that cost more than they should.
02
Safer driving
Driver scores and speeding alerts turn driving behaviour into something you can discuss with facts.
03
Faster answers
Customers and colleagues get accurate arrival times and locations without a single phone call to the driver.
04
Assets protected
Geofence, door, panic-button and jamming alerts, with remote immobilization where fitted, help protect vehicles and loads.
Where it applies
Industries
Where it applies
FAQ
Questions buyers ask
What hardware does LIOMO Fleet use?
LIOMO Fleet currently works with Teltonika GPS trackers communicating over the Codec 8 protocol. LIOMO selects, registers and configures the trackers, and arranges installation and any sensors or relays a vehicle needs.
Do all vehicles need the same package?
No. Every vehicle has Tracking. Vehicle data, Sensors, Remote commands and Fleet intelligence are added vehicle by vehicle, so a delivery van and a refrigerated truck in the same fleet can have different features.
How does remote immobilization stay safe?
An immobilize command is only sent when the tracker reports the vehicle standing still with its ignition off, it is checked again when the tracker connects, and it counts only once the tracker confirms it. If confirmation does not arrive in time, the platform takes the command back automatically. Every command is logged.
Who in my company can use it?
A main user manages the account, vehicles, drivers, geofences and alert rules. Colleagues can be given read-only access to see everything your plan includes without being able to change it.
Can we export our data?
Yes. With exports enabled, costs, income, fleet reports, fill-ups and service history can be downloaded as spreadsheets, and reports can be printed or saved as PDF.
Related solutions
Often combined with
- Delivered as a projectIoT SolutionsSensors, gateways and dashboards that monitor assets, environments and equipment, designed and integrated by LIOMO.Learn more
- Delivered as a projectEV ChargingCharging for fleets, workplaces and destinations, from site assessment and load management to monitoring and billing.Learn more
- Delivered as a projectWarehouse AutomationStaged warehouse automation, from scanning and sortation to dock visibility, built around your equipment and WMS.Learn more
- Engagement-basedCustom Software & EngineeringBespoke platforms, apps, device integration and data pipelines for operational needs no standard product covers.Learn more
Discuss Fleet Management for your operation
Tell us what you run and what you need to see. We will show you how it would work, with no obligation.